A new nonprofit, Brick House Ruins Preservation LLC, has been created to raise money for the preservation work. Its website is: brickhouseruins.org

Wilkewitz said recently that the truck was re-listed because the SWAT team got a new armored vehicle. It was donated to the Inkster Police Department.

I was a participant in the work done with #DisruptTexts and want to continue this work with all of our canonical literature. I have been thinking a lot about “Wuthering Heights” and will be creating text sets on the discussion of immigration and the treatment of the “other” as we look at Heathcliff as antihero. In what ways do we see the “other” excluded in our American society?

On the rebound, Thompson shoved McHale under the hoop, and gave him an extra push with his right arm as the ball went in and then kicked out toward them. Playing with the bad feet and unable to hold his position, McHale had gotten too low in trying to fend off the more muscular Thompson.

They travel on an electric-powered platform called a "skate." The device either comprises a vehicle itself carrying between eight and 16 passengers or carries a car that has been driven onto it. 

A 29-year-old digital marketer based in Bengaluru is trying not to think too much about the fact that she doesn’t have any plans for the New Year, but she is, she admits, a “little concerned”. Holidays are never easy for her—having recently moved to Bengaluru from Delhi, she remembers being alone for Diwali last year. By the end of the day, she had had a panic attack.

12. These are high-carbon steel Grade 5 or 8 OEM flange-head bolts for body, chassis and engine applications.

I tried again, adjusted my drop and came down nowhere near where I was supposed to be, but felt a pinch inside my left hip, on the leg away from Dante.

Another oddity found on our Dodge was the rearend. An antiquated design, it had tapered axles with keyed hubs. Not only were the axles a weak point, but servicing the brakes required a hub puller to remove the drums. To top it off, changing the transmission meant we no longer had a parking brake of any type (something that would bite us later). For all those reasons and to have better gear ratio options (plus the fact we had it) an 8-inch Ford assembly replaced the original rearend.

I’d driven to Milton for my second wrestling lesson. I wanted to learn more wrestling moves with Matt.

Police had to remove a woman who brought an “emotional support squirrel” on a Frontier Airlines flight headed from Orlando, Florida, to Cleveland.

For the tower base, I started by cutting a 2′ diameter disk out of plywood. I made a U-shaped assembly out of 1" pipe fit­tings. In the middle of that assembly I put a 1 1/4" tee. The tee is free to turn around the 1" pipe and forms a hinge that allows me to raise and lower the tower. I then added a close nipple, a 1-1/4 to 1 reducing fitting, and a 12" nipple. Later I added a 1" tee between the re­ducer and the 12" nipple so there would be a place for the wires to exit the pipe. This is shown in a photo further down the page. I also later drilled holes in the wooden disk to allow me to use steel stakes to lock it in place on the ground. The second photo shows the head and base together. You can begin to see how it will go together. Imagine a 10′ piece of steel conduit connecting the two pieces. Since I was building this thing in Florida, but was going to use it in Arizona, I de­cided to hold off on purchasing the 10′ piece of conduit until I got to Arizona. That meant the wind turbine would not be fully assembled and would not get properly tested until I was ready to put it up in the field. That was a little scary because I wouldn’t know if the thing ac­tually worked until I tried it in Arizona.